Results 1 to 5 of 5
Threaded View
-
03-05-2013 #3
Registered User
- Join Date
- Jan 2006
- Location
- Oregon
- Posts
- 1,773
I don't have an AME sub, but most that I've seen run a "U" shaped routing pattern, pointing the hose down from the caliper with a 90* and then similarly down from the frame, albeit most I've seen were just plumbed with hard line over the top of the frame rail. I'd be a little concerned with the placement of your bulkhead fitting due to the standout height of a 90* on top of that, but as long as nothing pinches, bites, etc, then you should be good to go.
Tobin
KORE3It's what I does.
-
Reply With Quote
