TCI Front Spindels on Camaro

[wcardoc]

Anyone out there had experience with TCI's front subframe? I have just finished my 68 Camaro and I have the front control arms level. I don't have a lot of clearance from the fenders to the tires. About 1 3/4 inch. The car rides firm but not too stiff. But they will rub if I hit a pretty good dip or bump. I talked with the guys at TCI breifly and he said may need to go back to the stock ride height spindles which are 2 inches taller. I am using the tire size they recomended.
Just wondered if anyone else has run into this?
Chuck

[Sales-TCI-Eng]

Anyone out there had experience with TCI's front subframe? I have just finished my 68 Camaro and I have the front control arms level. I don't have a lot of clearance from the fenders to the tires. About 1 3/4 inch. The car rides firm but not too stiff. But they will rub if I hit a pretty good dip or bump. I talked with the guys at TCI breifly and he said may need to go back to the stock ride height spindles which are 2 inches taller. I am using the tire size they recomended.
Just wondered if anyone else has run into this?
Chuck

You mentioned that you are running our recommended tire size but what is the wheel width and backspace?

-J