Results 1 to 11 of 11
Threaded View
-
07-11-2012 #1
Registered User
- Join Date
- Mar 2005
- Location
- St George Utah
- Posts
- 1,243
Speedtech Performance 70-81 Camaro/Firebird Torque Arm Rear Suspension
Here are some new pictures of the parts finished and installed.
we have been working on this for a while now.
The Torque arm is virtually the same as what we have for the First Gen Camaro, so the performance is proven, same install , No floor cutting. if you are planning on running a 335/345 rear tire you will have to mini tub obviously, but that is IT. NO other modifications to the frame, trunk floor, back seat. Only the shock X member needs to be welded in.
There is plenty of room for 3" exhaust over the axle.
This is our new Second Gen Test car, it has the Chicane 9" floater rear in it as well as the StreetFighter front subframe.
I will have some ride height pictures next week.
Attachment 61940Attachment 61941
-
Reply With Quote
