ProCar Rally Smoothbacks in '67 Camaro

[67rally]

I know this has been done before, but I figured one more thread can't hurt. I ordered the ProCar Rally Smoothback seats because I think the stitching still looks true to the period, but I wanted the additional support from the side bolsters. All this info is in my build thread, but I thought it might be useful for someone else considering these seats.




I have read several threads that complained that the seats sit too high, and at 6'0"+ I was a little worried. So rather than ordering the mounting brackets from ProCar, I contacted Wedge Engineering out of California and had them fabricate some new brackets. If you call them, ask for Wendell. They also supplied the sliders for the seats and said the combo would sit a couple inches lower than if I used the ProCar setup.


Here are the Wedge Engineering brackets and sliders:







Here are the ProCar sliders on the left and Wedge on the right:







Bracket bolted to floor:







Sliders bolted to seat:







Seats are installed and working great. I left the headrests off in this photo: