Mig wire size for Quadralink install

[80proZ]

The switch to .030 wire is the wrong direction! Keep the .024 for anything less than 3/16". The .030 requires more heat just to burn the added wire thickness! With proper prep and technique your 135 is more than adequate to handle any job on automotive fab work. I have a Hobart 135 running .023 wire and have used it to weld everything from 26ga to 1/"2. With absolutely no failures people completely under estimate these smaller welders. And if it makes a difference, I'm a welder by profession for a little over 20 years.