Results 1 to 8 of 8
Thread: Floor pan replacement
Hybrid View
-
07-19-2005 #1
New to Pro-Touring
- Join Date
- Aug 2004
- Location
- brockway, PA
- Posts
- 33
Floor pan replacement
Guys,
Ive done some searching with no luck.
How difficult is it to replace the floor and trunk with the one piece units.
Thanks
Dave
-
07-19-2005 #2
Registered User
- Join Date
- Nov 2004
- Location
- NW Arkansas
- Posts
- 1,742
Not to difficult to do....what kind of car?
KENNY DAVIS HOTRODS
07-19-2005 #3
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
Not difficult at all. Its actually the easiest way to go. Just take as many measurements from designated areas so you can match your new floor to them. If its a unibody car make sure to reinforce the entire car so it doesnt put unnecessary stress on the body.
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
07-19-2005 #4
New to Pro-Touring
- Join Date
- Aug 2004
- Location
- brockway, PA
- Posts
- 33
Sorry guys, The car is a 67 camaro.
07-19-2005 #5
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
Yeah what we said still applies. Just make sure to take measurements or at least mark where the old floor is before you cut it out. That way the new one will sit right in place. Good luck and take lots of before and after pics.
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
07-19-2005 #6
Registered User
- Join Date
- Apr 2004
- Location
- OKC, OK
- Posts
- 3,739
Be sure to have PLENTY of spot weld cutters. It took two people over 8 hours to remove all the spot welds to get the floor out of mine. And be sure to take plenty of measurements as stated before. Once the floor is out, the body can twist easily.
MikeMike Redpath
Musclerodz & Customz
405-288-0189
pro-touring parts specialists
Musclerodz.com
facebook page
http://www.facebook.com/#!/pages/Mus...73054649402015
instagram
Musclerodz
Reply With Quote
