Master Cylinder Recommendation for CTS-V Brakes.

[1bad68cat]

Hello All,

Just as the title says, looking for a master cylinder that will work with the mentioned brakes.



Vehicle Specs:
1966 C10 with the following
LY6 engine
6L90 transmission
1977 C30 hydroboost
2012 CTS-V brakes front and rear

I would like an off-the-shelf master I can pick up at any parts store or dealer. I was going to use the CTS-V master, but the mounting pattern will not work with my hydroboost. Any help is greatly appreciated. Thanks in advance.

Robert

[jpgolf14]

According to info I found online, the OEM CTS-V master cylinder has a 1" bore. So if you want to match that, there should be tons of OEM and aftermarket options.

[ryeguy2006a]

I used a C3 Corvette MC with manual brakes (68-76) and that has a 1" bore MC for my brake swap. It bolted right on to my factory booster. I think it is the same for the hydraboost.