ATS/Speedtech Chicane Coil over conversion package with lower arms and shocks

[67bird]

I have up for sale the following:

ATS/Speedtech Chicane coil over conversion package for Bilstein Shock absorbers.
2 Bilstein ASN series coil over shocks with the ATS Spec valving for the kit
2 adjusters for the above shocks (1 for each shock)
1 set of Global West lower control arms (GW# CTA-79H) modified by ATS by welding in the lower Chicane Bracket for me at the time of purchase.

Due to the fact that the lower bracket has already been welded in as well as the spacers for Bilsteins being tacked into place, I need to sale all of the components together. I had this for sale in another add with more parts, but listed it separate here due to add being all over the place with questions and comments on the parts. As far as fitment it would work with any first gen F-body or third gen X-body subframe. Also, I cannot comfirm or deny that this will work with tru-turn kits or whatever else any particular person may have. Parts are in Indianapolis, In 46237. I am asking $750 OBO plus shipping for them. I accept M/O, bank check, or Paypal (plus fees). Would also accept personal check, but will need to clear my bank before I ship. All parts have zero miles on them. They were installed for mock up to check shock clearance. I started to fit the upper mounts, but nothing major has been done to them.

http://www.speedtechperformance.com/...rod/prd216.htm

http://www.speedtechperformance.com/...rod/prd277.htm

I am open to reasonable offers so if you are on the fence don't be shy!!!!!!!!!!!!!!!!!!

**Note: ATS spindles in the photo have already sold. Steering arms will be in another add posted after this one.

[ROBS6T8]

If you don't mind me asking, why are you selling? Going a different route? Are you stuck with the Bilsteins from here on out? Confused as to the welding on the lower A arms. Thanks.

[67bird]

I am selling to fund my wife's college tuition funds. I didn't want to take out another loan for her to finish school. The spacers in the brackets are set for the width of the eyelets of Bilstein ASN series shocks. They could easily be changed to allow using any shock that you wished. Currently this is how Speedtech sales them. Their spacers are finish ground to width by the end user after they decide which shock they are using. When I bought this kit from ATS there were only two options Bilsteins or Penske's. As far as the welding on the arms. The bottom bracket supplied in the kit is initially bolted to the arms. Then they are welded in and bolts removed. This allows for the installation of an eyelet style coilover in a stock frame.

[67bird]

to help eliminate some confusion I added pictures of the lower arms.

[67bird]

Forum members. Lowered the price. I need to move this stuff so if you are interested make an offer.

[camarojake]

Sent you a pm over at Lateral-g.
Thanks. Jake

[67bird]

Sale pending to Camarojake. Thanks!!!!!!!!!!!!!!!!!!!!

[camarojake]

Payment sent! Thanks again Ben!

Jake