Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9
    1. #1
      Join Date
      Dec 2011
      Location
      Calgary
      Posts
      96
      Country Flag: Canada

      19X10 FRONT rim, what size tire would you run?

      my 19x10 Z06 wheels came in today and now I'm kind of stuck as to choosing a front tire size.
      I'm running 19x12 with 345/30/19 on the rear and with the width ,there is a decent amount of sidewall (120mm). I want to carry that same profile proportion to the fronts.
      I've been thinking about 275/40/19 or a 295/35/19
      either are within 7mm of sidewall height I suppose. and between 10 and 17mm shorter than the rears.
      I'm running Michelin Pilot ps2 on the rear.
      any thoughts?

      Warren


    2. #2
      Join Date
      Jan 2006
      Location
      Snohomish, Washington
      Posts
      2,235
      Country Flag: United States
      Are you sure your rears are 345/35/19? I thought the PS2s only went up to a 345/30/19. If you have the PS2s I would put a 285/35/19 on the front.
      Matt

    3. #3
      Join Date
      Dec 2011
      Location
      Calgary
      Posts
      96
      Country Flag: Canada
      yes, you are correct, it's a 30 not a 35.
      Warren

    4. #4
      Join Date
      Jan 2006
      Location
      Oregon
      Posts
      1,773
      Country Flag: United States
      I'm with Matt, the stock C6 rear tire size (285/35/19) would not only look good, but will also have pretty good range of tire options to choose from.

      Tobin
      KORE3
      It's what I does.

    5. #5
      Join Date
      Dec 2011
      Location
      Calgary
      Posts
      96
      Country Flag: Canada
      after doing the math. I think the 285/35/19 has the perfect matching sidewall to go with the rears.

      Thanks a bunch for the input guys.

      I'll be happy to be done that part of the ocd overthinking. lol
      Warren

    6. #6
      Join Date
      Dec 2011
      Location
      Calgary
      Posts
      96
      Country Flag: Canada
      Michelin has a hold on the 285/35/19 ps2 right now....
      I wonder at what width I'm going to run into real issues as far as rubbing goes, 295?
      Warren

    7. #7
      Join Date
      Jan 2009
      Posts
      606
      What kind of car is this going on? If it is a first gen Camaro, especially a '69 that tucks the front wheels, I would be tempted to run a 285/30 because the overall height of the 285/35/19 is going to be more difficult for the car to swallow up, and you'll be more prone to rubbing issues f you want it low.

      Matt

    8. #8
      Join Date
      Jan 2006
      Location
      Snohomish, Washington
      Posts
      2,235
      Country Flag: United States
      He has a '71 Monte..

      Do you have a used tire place around you where you could go and pick up a 295/30/19 to see if you will be able to clear?

      I have 295/30/19's on the front of my '67 cutlass on 19x11's and have plenty of room lock to lock. Then again I don't have any inner fenders.. Which is where you might run into troubles. You might have enough room on the front of that Monte, they are pretty big cars.
      Matt

    9. #9
      Join Date
      Dec 2011
      Location
      Calgary
      Posts
      96
      Country Flag: Canada
      Thanks a bunch,Matt. I'm not running inner fenders and we share pretty much the same suspension/frame, so 295on a 19x10 should be fine.
      Warren




    Advertise on Pro-Touring.com