Monroe Handler

[feeble]

Not much of an update to report. I'm overhauling the front suspension design again (4 or 5th time, I've lost count) Just haven't come up with anything I am 100% happy with yet, there are a lot of considerations to balance. I like the geometry I have but the packaging of it and turning it into something I can build is another matter.



Widened the front frame rails out from the stock II 23-3/4" to 28-1/2" inside. Still have about 3/4" of tire clearance at full wheel lock. Makes for lots of room for the engine and headers.

Just to see if it they fit, I did put the front Cobra R calipers / Wilwood hat / Coleman rotor together with the 17 x 8 Centerline Lazer wheels (http://centerlinewheels.com/wheels_d...d=35&sw_id=462) I have here. The calipers just clear the spokes by just under 1/8" without a spacer. Just an FYI for someone that might be looking for wheels to use with those calipers.