II Much Fabrication Fuel Vent installations

[JohnUlaszek]

Man that looks killer! Thanks for getting the picture up.

[Blue Oval Man]

Looks like a great product and will be ordering one in the future. Couple quick question though. I will be installing this on a 68 Mustang with the stock tank converted to efi.
Would I use the stock vented gas cap or could I use a non vented cap as I was considering putting the filler neck in the trunk?
The reason for this is, on the Mustang the stock filler tube has a horrible tendency to burp gas back out onto your shoes.
Would your vent prevent this from happening so I could still use the stock filler tube?
David.

[parsonsj]

Hi David,

Some quick answers for you:

You'll want to switch to a non-vented cap. Our vent takes that role.

I can't say for sure, but I think our vent will fix your burping problem. Those older systems that didn't vent from the tank had that tendency. I'd install the vent before moving your filler tube. You probably won't need to move it.

Hope that helps.

[Blue Oval Man]

Hi David,

Some quick answers for you:

You'll want to switch to a non-vented cap. Our vent takes that role.

I can't say for sure, but I think our vent will fix your burping problem. Those older systems that didn't vent from the tank had that tendency. I'd install the vent before moving your filler tube. You probably won't need to move it.

Hope that helps.

Thanks Jeff. I will try your vent first. One more question; A previous poster asked about a roll over valve and you stated that one would still need to be added. What style or make of valve would you recommend and where would it be mounted? Thanks again.
David.

[icemanrd19]

anyone up for a group buy? I need one and maybe 3 depending on the price

[Blue Oval Man]

anyone up for a group buy? I need one and maybe 3 depending on the price

I'd be in for 2 if you get it going.
David.

[JohnUlaszek]

Blue Oval Man,
To help our Canadian customers we have started distribution via Capital Gear in Alberta. Last I checked they had inventory and should be able to save you some import hassles and shipping costs.

[Blue Oval Man]

Blue Oval Man,
To help our Canadian customers we have started distribution via Capital Gear in Alberta. Last I checked they had inventory and should be able to save you some import hassles and shipping costs.

Thanks, I will check them out. I ship all my parts to a friends house in Montana and bring them across myself and never have any hassles or problems at all, just have to pay 5% tax. Not much I can do about shipping however.
David.

[colin204]

anyone up for a group buy? I need one and maybe 3 depending on the price

I am in for a group buy