Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Dec 2007
      Location
      Camp Hill, PA
      Posts
      43

      Torque Converter Fluid

      I have a 700R4 in my 69 Camaro and will be dropping the pan to replave the filter and manually check the operation of my trottle valve. My question is will the fluid in my torque converter completely drain if the pan is left off for a week or two? If so, will I need to do anything special after completing my work to ensure I don't run into any aireation issues?



    2. #2
      Join Date
      Aug 2011
      Location
      Clearwater/FL
      Posts
      512
      Country Flag: United States
      Converter fluid won't drain out, I don't think it would be wise to leave the pan for two weeks either. Wouldn't want a gust of wind blowin garbage up in there!
      85 monte, drift project- small block t5 and 8.8
      88 Blazer sbc
      05 300c

    3. #3
      Join Date
      Jun 2009
      Location
      Southwest Florida
      Posts
      246
      you can flush the converter and transmission using a cooler line flush. Never heard of aeration being an issue with GM autos. http://www.gassavers.org/showthread.php?t=7563 You can also just drop the pan and install a drain plug if there isn't already one, and do a few drain and fills over the course of a week, same overall effect, it's a bit wasteful with the fluid though.


      -- Dan

    4. #4
      Join Date
      Dec 2007
      Location
      Camp Hill, PA
      Posts
      43
      Thanks Guys.




    Advertise on Pro-Touring.com