Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6
    1. #1
      Join Date
      Nov 2011
      Location
      Roxboro, NC
      Posts
      15
      Country Flag: United States

      Pick up truck shocks and spring rates and tire sizes

      I have a couple questions for the pro touring pickup truck guys and gals that run autocross.
      I'm building a 49 Chevrolet pickup with a TCI chassis with custom IFS/4-link rear with wilwood 12" front and rear brakes with a LSX454 crate motor with a T56 Magnum 6 speed with a Centerfoce DYAD twin disc clutch.
      I was wondering what spring rates front & rear other pickup trucks are running and if it's a aluminum block or iron block?
      I was told by TCI I could use between a 350lb to a 500lb front springs and a 300lb to 350lb in the rear? What do think I need? I want as little body roll as possible.
      as possible. I currently have a 350lb front /300lb rear. The engine,trans,clutch weigh 750lbs.I'm going with a 18" wheel either a 255/40 front and a 285/35 rear or a 275/35 front and a 335/30 rear which do you think is better since I have no autocross experience, so is bigger better or not?
      Thanks for any help.
      Gary
      .Name:  IMG_4346.jpg
Views: 1580
Size:  153.5 KBName:  IMG_4345.jpg
Views: 1321
Size:  155.6 KBName:  IMG_4344.jpg
Views: 4574
Size:  218.7 KB



    2. #2
      Join Date
      Jul 2009
      Location
      Sackville, NB, Canada
      Posts
      166
      Country Flag: Canada
      I run 450 lb springs on the front coilovers of my sonoma with a similar wheel combo. An iron block/head 4.3 weighs in the same ballpark as an aluminum LSx, give or take a few pounds but other than that I'm not sure how good a comparison it would be to your truck. It's a firm ride on the street but it has very little body roll on track.
      Tyson
      '95 Firebird Formula: suspension + 315's
      '66 Mustang Coupe, 289

    3. #3
      Join Date
      Apr 2006
      Location
      Des Moines, IA
      Posts
      602
      Country Flag: United States
      If your main goal is mitigating body roll you have two approaches:
      1-stiff springs, small sway bars
      2-soft springs, stiff sway bars

      We typically like the soft springs/stiff sway bar approach as our cars are predominantly street driven. The higher the spring rate, the less you'll like driving it everyday.

      Once you know what that thing wieghs you can use our spring rate calculator to nail down the spring rate (just select either the "performance driving" or "racing" rates):
      http://www.ridetech.com/tech/spring-rate-calculator/

    4. #4
      Join Date
      Dec 2006
      Location
      Out of the Burbs of Detroit to SoCal, then onto my ancestral homeland, the woods of Cascadia
      Posts
      1,753
      Country Flag: United States
      Think you should be looking more at wheel rate than spring rate. Variations in geometry between applications will have two cars running the same spring rate delivering different wheel rates; or cars running the same wheel rate running different spring rates.
      Greg Fast
      (yes, the last name is spelled correctly)

      1970 Camaro RS Clone
      1984 el Camino
      1973 MGB vintage E/Prod race car
      (Soon to be an SCCA H/Prod limited prep)

    5. #5
      Join Date
      Nov 2011
      Location
      Roxboro, NC
      Posts
      15
      Country Flag: United States
      I'm new at this, can you please explain what wheel rate means?
      Thanks,
      Gary

    6. #6
      Join Date
      Dec 2006
      Location
      Out of the Burbs of Detroit to SoCal, then onto my ancestral homeland, the woods of Cascadia
      Posts
      1,753
      Country Flag: United States
      easier for me to copy and paste

      http://www.miracerros.com/mustang/t_wheel_rate.htm
      Greg Fast
      (yes, the last name is spelled correctly)

      1970 Camaro RS Clone
      1984 el Camino
      1973 MGB vintage E/Prod race car
      (Soon to be an SCCA H/Prod limited prep)




    Advertise on Pro-Touring.com