67-69 Camaro Parts

[BlackPearl]

245/45/17 & 215/45/17 They are 5x4.75 and backspace, I don't know how to measure so if you let me know what to measured, I will do it.



Bob

[DarkoNova]

Do you remember what size the wheels are? 17x7 and 17x8 maybe? Or bigger?

Backspacing, all you do is lay a straight edge across the back of the wheel and measure from the mounting surface to the straight edge.

[BlackPearl]

Ok, just letting you know, I read this and will go measure the BS and find out actual rim widths.

Bob

[BlackPearl]

The wheels are 17" x 8", all four. The back spacing, I measured was 4.25 or 4 1/4 from the mounting surfacing to the rear face of the rim/wheel.

Bob

[BlackPearl]

FYI = The Classic auto air unit & SS hood sold today. More stuff to come though now that this is active again. I just have to figure out pricing before I list the other items because that's the rules, I guess. Going to list stock 68 convertible seats next, vintage sanderson headers.... I have so much extra stuff! I will let you know as time permits.

Bob

[DarkoNova]

Backspacing sounds perfect for the front, I'll have to see if the rears will work on my car.

[BlackPearl]

Cool, let me know what you think. They were good on my car and I think with an 8" wheels that should be fine for your car also.

Bob

[DarkoNova]

Sorry it took so long, been crazy busy and hectic lately. Unfortunately I destroyed the stock rearend and have one out of a later GM car, I forget which model. But it's wider than stock, and I measured and 17x8 with 4.25" of backspacing totally won't clear. Almost half of the wheel would be sticking out of the quarter panels. :(

[NOPANTS-68]

got my lenses Bob! They look great- thanks man.

[BlackPearl]

I also have a 10 bolt rearend in my garage if that one doesn't work out for you. Enjoy, Bob

[ChrisT]

If you still have the close out panel and are wiling to ship to 29568. I will take it.

[Tony1968]

I have stock front suspension if you don't get this set.