Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6
    1. #1
      Join Date
      Sep 2011
      Location
      SW Virginia
      Posts
      6

      Ideas on building a 4.6 32 valve Mark 8

      I would like some imput on building up a Lincoln Mark 8. My goal is 500HP and 550 Torque and it must use a Turbo. I am wanting it to achieve maxium torque very fast so I'm thinking a small turbo is in order. Its for a street car grocie getter sleeper. Thanks.

      Mod it anyway


    2. #2
      Join Date
      Aug 2004
      Location
      Belle Plaine, MN
      Posts
      1,221
      Country Flag: United States
      Sean Hyland Motorsports is the recognized authority on these engines. I would consult them before anything.
      Scott Parkhurst


      2011 Car Craft Real Street Eliminator Winner

    3. #3
      Join Date
      Sep 2005
      Location
      Ky
      Posts
      56
      Check out the turboforums.com lots of good info over there. You will will probably want to upgrade your rods and pistons if your going turbo... Also check out modularmustangracing.com that shop has lots of modular parts along with turbo kits.

    4. #4
      Join Date
      Sep 2011
      Location
      SW Virginia
      Posts
      6
      Thanks for the info.
      Mod it anyway

    5. #5
      bigd427w Guest
      I've built several of the modular engines. Use the block, crank, and heads from the Mark 8. Buy a decent set of rods ie Scat, Compstar, etc, good pistons, and you can exceed your goals very easily. A Precision Billet wheel 62mm turbo can make 700hp

    6. #6
      Join Date
      Apr 2011
      Posts
      5

      Ideas on building a 4.6 32 valve Mark 8

      I have always liked turbos. Get ready for a near jet engine experience. The further the turbo is from the exhaust source, the slower boost will occur. Insulate your exhaust leading to turbo for faster boost. Enjoy. cars4one




    Advertise on Pro-Touring.com