Backpressure issues w/Hydratech

[Hydratech®]

Call PSC Motorsports and ask for Kevin or Lance: http://www.pscmotorsports.com These guys are REALLY GOOD at what they do, hence the name PSC = Performance Steering Components.

Make sure to tell them Paul from Hydratech sent you, and they will be able to hook you right up with a replacement pump output fitting that will plug n play directly in place of your existing pump output fitting (with a 1/8" orifice sizing that will slow the pump flow down to 2.0-2.2 GPM)(gallons per minute pump flow rate). They will need to know the approximate year / make / model your PS pump is from. Tell them that you are connecting a 5/8-18 hose to this fitting, and they will likely be able to install the flare seat insert into the fitting for you. You could aslo take a pick or woodscrew and fish the insert we supplied out of your original PS pump fitting and transer it into the replacement PS pump fitting, or let me know and I'll send you another one: http://www.hydratechbraking.com/hose...AB01C0112E3750

(the smaller of the two inserts)