Results 1 to 20 of 573
Threaded View
-
02-11-2012 #11
Registered User
- Join Date
- Jan 2011
- Location
- Boston, MA
- Posts
- 1,180
I picked up a nice set of used Vortec 906 heads and an Edelbrock Performer RPM intake. These will go on later this spring. I'll probably swap out the stock valve springs for some beehive springs to pick up a little more than the stock .480 max lift. I'll figure out what cam I'm going with once I determine whether I can use a roller cam or not. I'll clean everything up before it goes on the car.
906 Heads:
Intake:
-
Reply With Quote
