Results 1 to 20 of 573
Threaded View
-
03-11-2013 #11
Registered User
- Join Date
- Jan 2011
- Location
- Boston, MA
- Posts
- 1,180
I ended up with the afternoon off today, so I managed to get some work done. I didn't get many good pics because it was a low light situation, and most everything came out blurry.
I drained (11 gallons) and dropped the old fuel tank, and removed the Holley Black fuel pump. Mocked up the new corvette bypass regulator, which will sit right where the Holly pump was mounted. Then I mocked up the new Tanks Inc. tank, and figured out exactly how and where I was going to run my fuel plumbing. I'll order the new PTFE hoses this week.
Here's a pic of the Wix 33737 fuel filter/regulator along with a few Russell fittings. The 640940 is a -6AN to 3/8" quick disconnect male fitting, the 644113 is a -6AN male to 5/16" quick disconnect female fitting, and the 644123 is a -6AN male to 3/8" quick disconnect female fitting.
And here's a pic of the tank mocked up. I left it in it's baggie because I didn't want to bang it up too badly since it will be in an out a couple of times. I think I'm going to leave it silver and paint or order some new tank straps.
-
Reply With Quote
