Results 1 to 20 of 20
Thread: Auto for Autocross/Track Days
Hybrid View
-
12-21-2011 #1
Registered User
- Join Date
- Oct 2011
- Location
- Camarillo, CA
- Posts
- 78
The converter I have stalls around 2200 rpm. I'm running a TPI with a soft cam, therefore not a very aggressive stall speed. The reduced weight of the smaller converter was the point I was trying to make. Like going from a steel flywheel to an aluminum flywheel. I think your estimate is in the right range. Your tranny builder can probably give you some good suggestions based on your engine combo, vehicle weight, and rear axle ratio. Best of luck with your project.
-
Reply With Quote
