Results 1 to 6 of 6
Hybrid View
-
12-10-2011 #1
Registered User
- Join Date
- Sep 2010
- Location
- S.F. Bay
- Posts
- 54
C5/C6 corvette hub bearing bolt pattern
Looking for the bolt pattern if someone has it for the c5/c6 hub bearings where they mount to the spindles.
-
12-10-2011 #2
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
heres what i got.... i'll double check that 4.26" tomorrow. i thought they were symmetrical
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
12-12-2011 #3
Registered User
- Join Date
- Feb 2011
- Location
- CA
- Posts
- 255
They are symmetrical....and measuring your way I get 3.980" spacing....and bolts that fasten are metric but measure .462" so depending on how much slop or what size shoulder the bolt has that you will be using I would adjust the hole size accordingly. If I recall the factory fasteners do have larger "shoulders" than thread size. Hope this helps.
Originally Posted by MrQuick
Matts dimension though will be most helpful....but isnt the bolt circle actually 4.568?
12-12-2011 #4
Registered User
- Join Date
- Nov 2005
- Location
- Auburn, WA
- Posts
- 1,359
They are on a 2.284" bolt circle, basically 58mm.
Matt Jones
Mechanical Engineer
Art Morrison Enterprises
12-12-2011 #5
Registered User
- Join Date
- Jan 2006
- Location
- Oregon
- Posts
- 1,773
X2...it's a symmetric 3-bolt pattern on a 58mm [2.283"] radius, or 116mm [4.567"] diameter, bolt circle. The center to center distance is 3.955" around the perimeter, hole to hole. Originally Posted by silver69camaro
Tobin
KORE3It's what I does.
12-12-2011 #6
Registered User
- Join Date
- Sep 2010
- Location
- S.F. Bay
- Posts
- 54
Thank very much everyone.
Reply With Quote
