Need decent plug wires!

[CarlC]

I too had the same problem but wanted to use the stock wires supplied with the engine. If a 135* boot will work then go here:



http://www.kingsbornewires.com/categ...?categoryId=98

...and order up the 135* NGK screw-on boots. Remove the boot from the stock wire and attach the NGK's. It's a 20-minute job, works great, and less than $40. They also have a ton of other options for boots but with the stock wires the length is the limiting factor.

If in doubt order one boot, check for fitment, then order what you need. They can also make special sets as well.