Results 1 to 3 of 3
Thread: What am i missing??
-
11-20-2011 #1
Registered User
- Join Date
- Sep 2011
- Location
- Altamonte Springs, FL
- Posts
- 38
What am i missing??
So not sure what is wrong with me but what should be a simple task is not turning out so. Why cant if figure out how to remove the driver side motor mount on a second gen camaro? Does the lower A- Arm need to be removed. I dont have any access holes like the pass. side? What am i missing??
-
11-21-2011 #2
Registered User
- Join Date
- Oct 2009
- Location
- New Derry, PA
- Posts
- 1,265
I doubt the control arm needs to be removed. You may have to get up in there with a long extension and a universal socket to get to the nuts.
Originally Posted by SecondGenFan
Ray Kaufman - Wyotech Chassis Fab and High Performance Instructor. Words of Wisdom from an old master... at Asylum Custom Interiors website
-
11-21-2011 #3
Registered User
- Join Date
- Sep 2011
- Location
- Altamonte Springs, FL
- Posts
- 38
Thank you. I have tried every tool on my box of tricks to reach them. I am thinking i need an open end wrench with a universal type socket on the other end? I am going to try raising the fron of the car further off the ground so i can see it better and try your suggestion with longer extensions and a universal. Thanks again for the response.
Reply With Quote
