Results 1 to 5 of 5
-
10-04-2011 #1
Registered User
- Join Date
- Oct 2004
- Location
- Papillion, NE
- Posts
- 203
Source for 3 inch 45 degree mandrel bends?
Looking for four 45 degree 3 inch mandrel bent pieces
Could live with 2, but they will be seen so I want them to match
Just plain steel or aluminized, nothing fancy, anyone got a cheap source?70 Mustang - 489 cid FE, KC ported Edelbrock heads, Modified Victor Intake, Mass-flo EFI, Erson valvetrain, Supercomps, TKO-600, 4.10 9 inch.
71 F-100 4x4 SB 4x4, 461 cid FE stroker, Edelbrock Pro-flo 4 EFI
13 Ram Laramie 2500 4x4 6.7 diesel - trailer puller
-
10-04-2011 #2
Registered User
- Join Date
- Sep 2007
- Location
- York, Pa
- Posts
- 457
RacePartSolutions.com
Justin Snow
10-05-2011 #3
Registered User
- Join Date
- Mar 2005
- Location
- Loganville, GA
- Posts
- 931
Speedway Motors has some fairly cheap. Quality is pretty good, used them myself.
http://www.speedwaymotors.com/Exhaus...-OD,38876.html2018 Cruze LT Hatchback
2003 Suburban 2500 8.1L
1975 MGB Roadster
2003 GSX750F Katana
10-05-2011 #4
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Orlando, FL
- Posts
- 10,604
Cone Engineering. They are a sponsor here, and they are very cost-oriented.
www.coneeng.comJohn Parsons
UnRivaled Rides -- Modern upgrades for your ride.
UnRivaled Rides recent project -- LS9-powered 69 Camaro
10-05-2011 #5
Registered User
- Join Date
- Oct 2004
- Location
- Papillion, NE
- Posts
- 203
Thanks guys!
70 Mustang - 489 cid FE, KC ported Edelbrock heads, Modified Victor Intake, Mass-flo EFI, Erson valvetrain, Supercomps, TKO-600, 4.10 9 inch.
71 F-100 4x4 SB 4x4, 461 cid FE stroker, Edelbrock Pro-flo 4 EFI
13 Ram Laramie 2500 4x4 6.7 diesel - trailer puller
Reply With Quote
