Results 1 to 20 of 381
Thread: Half-Breed
Hybrid View
-
09-20-2011 #1
Registered User
- Join Date
- Oct 2010
- Location
- SLC
- Posts
- 660
mocking up front suspension now.
The coilover tower was meant to fit the original shock tower. with those removed I had to make a rear support.
Definitely a bit wider than the mustang II front end.
7* of caster. I've spent plenty of time aligning the front end to make sure everything will be in the correct place when I do the final welds. The lower ball joints are squared up with the rear suspension mounts then the rest of the front suspension references the lower ball joints.
Zach
1970 Mach 1 build - Half-Breed (pro-touring.com)
-
09-20-2011 #2
Registered User
- Join Date
- May 2011
- Posts
- 301
Looks good , aligning is a pain but rewarding once rolling, any flares on the work?
1972 Nova " Hotwhilz Special"
https://www.pro-touring.com/showthre...t&goto=newpost Under the knife!
09-21-2011 #3
Registered User
- Join Date
- Oct 2010
- Location
- SLC
- Posts
- 660
Definitely planning on flaring. nothing too drastic, i'm trying to keep the car looking fairly close to its original design. check out the photoshop at the beginning of the thread and you will see what I am going for.
Originally Posted by Hotwhilz
Zach
1970 Mach 1 build - Half-Breed (pro-touring.com)
Reply With Quote
