Half-Breed

[slazisme]

Its unfortunate about the engine but looking at some of the pics I'm sure you literally had a blast driving it.
Summit sells a some nice 4.080" kits if you can get away with the cylinder walls being okay, only thing is they're B/O. Maybe check with them to verify.
Another option is to check with SRP/ JE pistons, I'm sure they can build exactly what you need at a cost, I would double check whether a aluminum block liners can go .085".
https://www.summitracing.com/search/...ement/6-8l-418

As for shimming the bearing I usually go for .150" but ultimately its best to check with the clutch manufacturer.
Hope things get back together okay.