Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5

    Threaded View

    1. #1
      Join Date
      Apr 2010
      Posts
      364
      Country Flag: United States

      Need help with LS3 Connections

      1. I am looking at the following connection for the PCV system (passenger side of throttle body).


      I have this little plastic line that I believe is supposed to connect it to a port right below itself on the intake: http://farm7.static.flickr.com/6147/...dff15995_z.jpg
      However, unlike this photo that I found on ls1tech (which I believe is an LS3),


      the plate under the intake on my engine doesn't appear to have that connection. Any advice how I should hook this up? My engine is an L76 with an LS3 top end (in case that makes a difference). How or where should I connect this to if I don't have the same connection below the intake?


      2. Do I need this Evap Emission Purge Solenoid for the engine to function correctly? If so, where does it connect to (pic taken from another, I believe, LS3 engine)?
      http://i70.photobucket.com/albums/i9...3/DSC07534.jpg


      3. This port is capped at the back of my driver's side valve cover

      Do I need to connect it somewhere?

      4. How about this connection on the driver's side of the throttle body?


      5. I plan to connect this red capped port (passenger side of intake) to a barbed bung in my 4" air intake, between the MAF and the throttle body. Is that correct?

      6. My harness has a connection titled "VEH SPD" which I assume connects to the VSS sensor on my T-56 Magnum. Any comments on how to get this to talk nice with my Dakota Digital gauges?






    Advertise on Pro-Touring.com