corvette wheels

[FresnoRS]

what size spacers are u using and how much are they car looks good

I am using 2" adapters in front and no rubbing with 235-45-17's. I need 2 5/16" in the rear with 275-40-18's and I can get a little rub on the driver's side over a bump if the suspension is loaded. I have DSE shock plates and I also need the space for the wheels to clear those plates. I still have drums on the back so the spacing may be different if you have a disk brake setup. I bought the cheapest billet adapters i could find knowing that they would be of limited use while I worked out the spacing as I got the car lower. I have an assortment of spacers from the local parts stores that used to get to the magic 2 5/16" for my fitment. My rear end doesn't sit perfectly centered so the passenger side has a bit more clearance than the driver's side.