Results 1 to 3 of 3
Threaded View
-
08-06-2011 #3
Registered User
- Join Date
- Sep 2006
- Location
- Southern Indiana
- Posts
- 4,709
No dont weld. Use a pipe plug tap, tap out the lug holes and any other holes, you can tack them but really not too critical. Then face off the axle, I trim them on both sides.
Then center it up in a lathe, scribe the centerline of the bolt pattern then when you place wheel or what ever you use to mark it, use a centering punch and then drill your new holes. You can have the plugs tigged a little for insurance but rarely needed unless your gonna do a lot of road course racing.
Lee Abel
AFTERMARKET PERFORMANCE
1977 Chevy Monza 2+2:Project "Cheap Trick"
1978 C10 Long bed , On air and trailer puller
2006 Buell Blast ,Just a bike to ride and for mileage
1966 Caprice 4dr Sports Roof fact.327/now 350/SOON 454???? Project "II Old,,,ZERO BUDGET OR LESS CAPRICE!"
-
Reply With Quote
