ABody Folks with ProCharger LSX Transplant kit - PS fit?

[BanditDave]

Hey Guys,

I was just checking to see if there was anyone out there with the ProCharger LSX Transplant kit in a '68-72 Abody? I am almost done installing all the pulleys but there is a significant clearance issue with regards to the PS.

I am using Edelbrock mounts and a GM600 steering box. The location where they put the PS pump makes it virtually IMPOSSIBLE for it to work. The pulley slams into the steering box and it is a hard hit...not a little grinder clearance type of interference. I am looking at possibly making my own bracket and moving the location of it slightly and going with a Ford PS Pulley on the Vette pump to alleviate the issue (if I even can) but I just may end up going manual steering with the delete kit if this fails because I cannot afford a $1700 Unisteer Rack.

Let me know if any of you guys have faced similar issues...pics are appreciated!



Dave

[Concept One Pulleys]

Dave--

Give us a shout at the shop...we have a ton of experience with situations like yours where things just don't quite want to work together.

Call us toll free at 877-337-0688 and ask for Kevin. He'll be able to point you in the right direction.

Regards,

Concept One Pulleys
LS Engine Pulley Kits

[69cutlassrkt]

Hey dave post up some pics. I would like to see the install