GM A Body Drum Hubs New Bearings, Kore 3 C5/C6 Brake Brackets, steering arms, Baer

[Chevelle598bb]

I have a few parts for GM A bodies (Chevelle, GTO, Skylark, Lemans, Cutlass, etc.) that I will not be using in my build.

Chevelle drum hubs clearanced for C5/C6 brake rotors, bead blasted, painted black, new 1/2 wheel studs installed, New timken bearings and races and new seals. For use with the Kore 3 brake brackets on factory 64-72 chevelle spindles. Used for mock up after modifications to the hubs. Not driven on. 95.00 Shipped.

Kore 3 C5/C6 brake brackets with hardware for 64-72 disk brake spindles. Used for mock up but never driven with. 105.00 Shipped.

Stock chevelle steering arms in good condition. Bead blasted and then painted black. 1/2 bolt size. 45.00 shipped.

Baer Tracker tie rods for 64-72 Chevelles with new inner tie rods. For stock spindle only. Used for mock up only and never driven on. 155.00 Shipped.

I am switching to an ATS spindle and don't need these anymore. Thanks Jason.

[Chevelle598bb]

Here are some pictures.

[130fe]

Interested in brake brackets and hubs. PM sent.

[130fe]

Payment sent for the brackets and hubs. Send the tracking info when it goes out. Thanks!

[Chevelle598bb]

Hubs and kore3 brackets are sold.