Enter your username:
Do you want to login or register?
    • Forgot your password?

    Login / Register




    Results 1 to 10 of 10
    1. 07-15-2011 #1
      threbikecrash
      threbikecrash is offline Registered User
      Join Date
      Jun 2008
      Location
      Arizona
      Posts
      6

      1987 cutless LS 1 swap complete- looking for suspension help.

      I have a 1987 Olds Cutless that was a v6 car. Converted a 2000 Chevy 5.3 motor into a LS 1 style. Luanti cams and spring, larger 202 valves, stage one ported stock head, pacesetter long tube headers, professional products rails and regulator, ARP rod bolts etc. Built a mild turbo 350 with a 2800 stall converter due to my budget. I used a Buick turbo 3.8 fuel sending unit and cleaned the tank really good.

      I have a 8.5 10 bolt rear end I was thinking about modifying. Axles and a 4:11 gear. I have not done suspension work and need a little help on a kit, or a mixture of parts that will help me get a low stance and still be able to work corners. I plan on a 17x11 with 315s in back. Going to notch in the frame and make a min-tub or buy a in-expensive kit. I want to use Crager SS 2 piece wheels, and roll the fender with Buick Regal fender flares or make a set.

      I will post pictures of it current state at the end of the week. I really need some good ideas for suspension.

      Thanks.

      Dave.
      Reply With Quote Reply With Quote
    2. 07-20-2011 #2
      The Stickman
      The Stickman is offline Registered User
      Join Date
      Dec 2008
      Location
      Lehigh Valley Pa
      Posts
      1,269
      Welcome to the forum. Plenty of G-body guys here to help you out.
      1996 Federal Cadillac hearse
      1988 Eureka Chevy hearse
      Reply With Quote Reply With Quote
    3. 07-20-2011 #3
      threbikecrash
      threbikecrash is offline Registered User
      Join Date
      Jun 2008
      Location
      Arizona
      Posts
      6
      Thanks. Will post pictures this Friday. Got it to crank today. Just need to adjust the fuel plumbing and wire in the fan switch.
      Reply With Quote Reply With Quote
    4. 07-24-2011 #4
      framedoctor's Avatar
      framedoctor
      framedoctor is offline Registered User
      Join Date
      Mar 2008
      Location
      West-central Ohio
      Posts
      31
      Country Flag: United States
      Mark at SC+C http://scandc.com/new/ can help you out with the suspension. He's a site sponsor here. DSE has a newer line of suspension parts for he g-bodys as well. I like the SPC upper control arms that SC+C uses.

      Framedoctor a.k.a. David
      1986 Olds 442 grey/silver 350 TPI/200R4 , AFI wiring, SC+C stage 2+ front susp, boxed rear control arms,Eibach springs/ Edelbrock shocks, Coys 17x8f 17x9r, custom 2 1/2 exhaust w/side exit.
      Reply With Quote Reply With Quote
    5. Sponsored Links
    6. 08-01-2011 #5
      threbikecrash
      threbikecrash is offline Registered User
      Join Date
      Jun 2008
      Location
      Arizona
      Posts
      6
      Thanks. Who has some knowledge on pluming the fuel lines. I am using the stock metal lines off the tank. 3/8 feed and 5/16 return. From the tank up is braided lines. Do I have to loop the fuel rails, or can I have one feed into the rails and use the fuel pressure regulator for the return.
      Reply With Quote Reply With Quote
    7. 08-17-2011 #6
      irregal83
      irregal83 is offline Registered User
      Join Date
      Jun 2011
      Posts
      145
      welcome to the forum! yes we do love g bodies! i might be able to help you out a little with your suspension if you have any specific questions.

      Dave Van Nuys
      83 455 Regal in progress
      Reply With Quote Reply With Quote
    8. 08-18-2011 #7
      Driver X's Avatar
      Driver X
      Driver X is offline Registered User
      Join Date
      Sep 2010
      Location
      So-Cal * Corona
      Posts
      81
      welcome
      John
      71' Nova
      Reply With Quote Reply With Quote
    9. 09-04-2011 #8
      AUS.NOVA's Avatar
      AUS.NOVA
      AUS.NOVA is offline Registered User
      Join Date
      Oct 2009
      Location
      Brisbane, Australia
      Posts
      65
      Country Flag: Australia
      Welcome to protouring.com
      http://www.youtube.com/watch?v=EBF3OWVfjBg

      Reply With Quote Reply With Quote
    10. 10-03-2011 #9
      CruizinKev's Avatar
      CruizinKev
      CruizinKev is offline Registered User
      Join Date
      Mar 2009
      Location
      overseas
      Posts
      3,434
      Country Flag: United States
      welcome aboard! can't wait to see some pics of the car! g-body ftw
      Kevin S. (overseas in Germany)
      1963 Chevrolet Impala 2d ht Coupe

      www.CruznArt.com
      CRUZN - Automotive Artworks
      Reply With Quote Reply With Quote
    11. 10-03-2011 #10
      Tony_SS
      Tony_SS is offline Pro-Touring Veteran
      Join Date
      Nov 2006
      Location
      Washington, MO
      Posts
      2,363
      Welcome aboard.
      Reply With Quote Reply With Quote


    « Previous Thread | Next Thread »
    Get our mobile app (iOS)!

    Follow Pro-Touring.com on Social:


    Advertise on Pro-Touring.com