RideTech Tru Turn System

[BuzzKillian]

I love the idea behind the Tru Turn system but wish there was a second spindle option with no drop built into the spindle itself since my car already has the Hotchkis TVS. I see the Tru Turn kit being a great gap filler to something Hotchkis doesn't address, bump steer. In my mind the lowest cost way to keep both the Hotchkis front springs and have the Tru Turn is to use a 1.5 to 2 inch spring spacer (not ideal). Does anyone have an opinion on installing a Tru Turn using spring spacers? Thanks!

With a roughly 2:1 ratio on the Spring/Control Arm. You would only need a 1" spacer to maintain your current ride height.