Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 300

    Threaded View

    1. #1
      Join Date
      Oct 2004
      Location
      Indiana
      Posts
      1,371

      RideTech Tru Turn System

      The 48 Hour Camaro was the testbed for this new suspension system. It has worked out extremely well, so we are now ready to release it to the world...
      Also, for a limited time, and only for Pro-touring.com menbers...ask about your special introductory pricing.




      The TruTurn Steering Package

      If you tuned in for the 48 Hour Camaro build, you probably noticed that the build team put 10" wide tires on the front and wondered how it was done. Well now the truth is out...it was all made possible by the TruTurn, a steering upgrade package brought to you by ridetech.
      What is it?

      The TruTurn system is an upgraded steering system that includes the following:
      1. Spindles - taller to improve the camber gain and a raised spindle pin to lower your car by 2"
      2. Steering Arms - designed to correct bumpsteer AND allow clearance for up to a 10" wide wheel with a 5.75" backspacing.
      3. Draglink bracket - bolts onto oem draglink to relocate the inner tierod end to minimize bumpsteer
      4. Tie Rod Assemblies - integrates with your new steering arms and centerlink to provide a tru "no fab" bolt on steering system.
      What will this system do?

      Everyone knows the early Camaro/Nova front ends have very poor suspension geometry...the tires lean outward around turns, the bumpsteer is bad, and there is little room to run a wide wheel because of the OEM steering arm interfering with the inside of the wheel. The TruTurn system resolves ALL of these issues...the tires now lean INTO the turn, the bumpsteer is UNDER .050" through 5" of suspension travel, and you now have clearance to run up to a 10" wide wheel with a 275mm tire!



      TruTurn complete package includes:

      spindles, steering arms, draglink bracket, and tie rod assemblies









      Price: $1000
      Call in and ask about an introductory price! Phone: 812.481.4787
      Vehicle Applications

      Part #

      Price



      1967-69 Camaro

      11169500

      $1000

      Buy Online

      1968-74 Nova

      11169500

      $1000

      Buy Online


      TruTurn UPGRADE package ( same as above MINUS the spindles )


      Price: $650
      Vehicle Applications

      Part #

      Price



      1967-69 Camaro

      11169525

      $650

      Buy Online

      1968-74 Nova

      11169525

      $650

      Buy Online









      48 Hour Camaro - Ridetech Front Suspension Video




      Related to the TruTurn, check out this front suspension overview of the 48 Hour Camaro. The video talks about the new TruTurn steering package and how it helped fit up a 10" wide wheel on the front of the car while at the same time nearly eliminating all of the bump steer.



      Also don't forget to check out the Triple Adjustable Coil-Overs being installed!














      48 Hour Camaro - Ridetech Rear Suspension Video




      Check out the AirBar set-up going in the 48 Hour Camaro - only this one isn't being built with traditional air suspension, but using the new triple adjustable coil-over shocks from RideTech!














      Bret Voelkel
      Director of Innovation Fox Powered Vehicles Group
      Founder/ Former Owner
      RideTech/Air Ride Technologies, Inc.

      How do you spell Impossible?





  • Advertise on Pro-Touring.com