early mustang guys suspension help please.

[67cougnut]

so I am using the strut front end from gateway classic mustang similar to the RRS setup. I went ahead and bought tubular lower control arms and adjustable strut rods from street or track. heres the dilema the front end wont align. I need .5-.75 neg camber and with the lower control arms sucked all the way in (towards the motor) best i can get is neg 2 deg camber and the top camber adjustment on the new spindle is maxed.


SOOO..... now I have been in touch with gateway and they seem to think that my tubular control arms have too much negative camber built into them. which kinda makes sense since the lower ball joint does seem to bound up. So I have decided that I should go with the opent tracker lowers but heres my other dilema a few guys have said now that all my load is on the LCA the stock balljoint will not support the weight of the car so now i may have to have open tracker box a set for me and set it up with a screw in ball joint.

any thoughts?