Results 81 to 100 of 172
-
06-29-2011 #81
Registered User
- Join Date
- Apr 2006
- Location
- Atlanta GA
- Posts
- 7,477
wow.. this give the Novanutcase a run for his money.. wherever that car is now..
maybe bested it already..
-
06-29-2011 #82
Registered User
- Join Date
- Dec 2007
- Location
- Mundelein, IL
- Posts
- 148
Hector, no hurt feelings. I think that we have everything just where we want it, but thanks for the input.
SRD, thanks for the responses. Glad you can appreciate everything that has gone into the car so far! There is quite a bit more to come. I didn't have any good pics of the lower splitter/bumper change in metal. We mocked it up several different ways before finalizing the design. Stay tuned for more pics.
Everyone else, thanks for following along and the great comments!
-
06-29-2011 #83
Registered User
- Join Date
- Dec 2007
- Location
- Mundelein, IL
- Posts
- 148
Here is some of the interior sheet metal work:
Started by laying out a dash design in foam to give us a guide to contour the sheet metal to.
Then began forming the sheet metal and checking the fit against the foam buck.
-
06-29-2011 #84
Registered User
- Join Date
- Dec 2007
- Location
- Mundelein, IL
- Posts
- 148
Top of the dash is getting close and beginning to lay out the inset molding that will run through the center of the dash.
The inset molding is roughed in and proceeding on the lower portion of the dash
-
06-29-2011 #85
Registered User
- Join Date
- Dec 2007
- Location
- Mundelein, IL
- Posts
- 148
Laying out the eyebrows over the sides of the dash.
-
06-29-2011 #86
Registered User
- Join Date
- Dec 2007
- Location
- Mundelein, IL
- Posts
- 148
Eyebrows completed on the dash and further progress on the lower portion that will house the stereo unit. A/C vent holes also installed. The outside A/C vents were moved later on in the build in favor of a cleaner look.
-
06-30-2011 #87
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
wow you guys can shape metal like an artist with clay...good job making it look so easy.
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
-
06-30-2011 #88
Registered User
- Join Date
- Jun 2011
- Location
- St. George, Utah
- Posts
- 1,629
"SRD, thanks for the responses. Glad you can appreciate everything that has gone into the car so far!"
Thanks, after being through car design school and now in a street rod program I have a much better feel for the effort that goes into something like that. Even still, watching your build come together is like attending another class! Keep it coming!!
Once again, great design work on the dash. What sort of foam did you use? That's a great idea for mocking things up...
-
06-30-2011 #89
Registered User
- Join Date
- Dec 2007
- Location
- Mundelein, IL
- Posts
- 148
Inset aluminum trim molding completed for the center of dash along with engine start button installed. A/C vents relocated to the lower portion of the dash and the center console starting to take shape
More progress on the aluminum center console and e-brake.
06-30-2011 #90
Registered User
- Join Date
- Dec 2007
- Location
- Mundelein, IL
- Posts
- 148
ear cap portion around the e-brake.
07-01-2011 #91
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
Wow...looking more like a finshed car everyday...you guys are moving along on this. It would take me a week to make one little part and it wouldn't look anywhere as nice as your stuff does. Love to see a video of one of those sheet metal pieces being formed into interior parts.
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
07-01-2011 #92
Pro-Touring Veteran
- Join Date
- Nov 2006
- Location
- Washington, MO
- Posts
- 2,363
Someone deserves a raise! Incredible skill.
07-01-2011 #93
Registered User
- Join Date
- Dec 2009
- Posts
- 1,607
I have a sneaky suspicion this car is already done - or very close. I wonder if it'll be @ Colombus?
Originally Posted by John Wright
Ron in SoCal
69 Camaro in progress
http://www.lateral-g.net/forums/showthread.php4?t=31246
Used to be known as flash911
07-01-2011 #94
Registered User
- Join Date
- Nov 2009
- Location
- Knoxville, TN
- Posts
- 45
In PHR the car looked further along than in these pictures and considering magazine lead times I would say it is much farther along.
1969 Mustang Mach 1
07-01-2011 #95
Registered User
- Join Date
- Dec 2007
- Location
- Mundelein, IL
- Posts
- 148
The start of the inner fenders and engine bay details:
07-01-2011 #96
Registered User
- Join Date
- Jul 2008
- Location
- ohio
- Posts
- 1,135
sweet any pics with the hood down im interested in the vents you have up there that pertrude into the hood area
keep the wheels a spinning and the Beavers a grinning
(burt reynolds-smokey and the bandit)
07-01-2011 #97
Registered User
- Join Date
- Jan 2009
- Location
- Jacksonville Florida
- Posts
- 667
Execution and design is just amazing.Wiping the drool off.
Do what's right,not what's easy
69 Firebird
71 Cuda
98 Supra 6speed white APU
98 Lexus GS400tt widebody
Elite Custom Body
Stefan B.
07-02-2011 #98
Registered User
- Join Date
- Dec 2010
- Posts
- 88
How so clean with all the welding and grinding / smoothing??? Really impressive!
Brian
2009 Pontiac G8 GT - Rotofab CF Intake
1968 Pontiac Firebird - basket case
Formerly - many cars I shouldn't have sold.
07-02-2011 #99
Registered User
- Join Date
- Dec 2007
- Location
- Mundelein, IL
- Posts
- 148
Thanks Craig. I will post some hood pics shortly. The vents sit flush with the top of the hood. Originally Posted by craigs73
Thank you! Originally Posted by elitecustombody
Thanks, we have some very skilled sheet metal metal guys Originally Posted by bdahlg68
07-02-2011 #100
Registered User
- Join Date
- Dec 2007
- Location
- Mundelein, IL
- Posts
- 148
Inner fenders further along and engine detail starting to take shape:
Tags for this Thread
Reply With Quote
