Stuff for sale - LS swap pan, injectors, LS starter, bump steer kit, etc

[Steve1968LS2]

Garage cleaning time again.

First off, I have a slew of single tires. These were used for durometer testing and I'm tired of moving them around my garage.

These three are brand new and all are 275/35/18 in size.

BFG R1 competition tire
Toyo R888 SOLD
BFG drag radial

Again, never mounted, brand new and I have ONE of each. $80 each plus shipping. Can deliver locally.

--------------------

GMPP LS Swap oil pan kit (PN 19212593) -- $150 new.. buy it here for $100 shipped -- It's brand new, never mounted.. here's some info. SOLD


http://www.jegs.com/i/GM-Performance...ductId=1221210

http://www.crateenginedepot.com/site...12593-2410.htm

--------------------

Baer "Tracker" Bump Steer kit -- never used.. $100 shipped -- These are for a Ford.. which means they will work with most Ford rack and pinion systems. PN 3261005 SOLD


http://www.summitracing.com/parts/BAE-3261005/

-------------------

NEW Powermaster high-torque starter for LS engine.. see all the details here:

http://www.summitracing.com/parts/PWM-9509/



$160 shipped.. brand new in box.. SOLD

-------------------

Fuel injectors.. I have three sets of LS2 (33lb) like new fuel injectors.. only need one set. These come complete with o-rings and can support just over 560 hp or so.. they were a tiny bit small for a 416 LS3 we built.

$80 a set (8) shipped

----------

Anvil Carbon Fiber trunklid.. I ran this on Penny at the 2009 optima event. I was going to run on Track Rat but since the lid is getting painted we're just running the metal one that is already fitted to the car. Has been drilled for a spoiler.

$200 plus shipping SOLD

-------------------

LS1 take off aluminum cathedral port heads (241 castings).. These came off a 2001 LS1 Camaro and are complete. Would be great to have ported for a low buck build. $180 for the pair shipped. Nothing wrong with them besides dirty.

-------------------

Forgeline WC3 wheels.. Having two sets of wheels is handy, but now that I just run 200tw "street" tires I sort of an unneeded luxury.. These have gunmetal centers and brushed hoops. 18x9.5 front and 18x12 rear (backspace is 6").. has the titanium bolt upgrade. $2000 plus shipping and can deliver to most of SoCal.

SOLD

--------------------

More to follow.. along with images

[Ron.in.SoCal]

Steve - I'll take the R888. Save it for me and we'll connect late this coming week. I'll be out of town till Thurs. Thx...

[nvmyss]

Steve I'll take the trunk lid

[67 ls1 vert]

I'll put my name on the list for the trunk lid if the other deal fals through.

[jprewitt]

Would the wheels fit a 68 Camaro with a stock front end and a mini tubbed rear end? If they will fit I'll take them if you don't mind shipping to Austin, tx.

[68CamaroYu]

Let me know if the wheels and trunk lid deal falls through.

[opnwide]

Aww, I wanted those toyos. I've already got the 335s on the back:(

Let me know if the deal falls through with Ron.

[Steve1968LS2]

Steve I'll take the trunk lid

You get first dibs (based on time stamps).. email me at [email protected]

Steve - I'll take the R888. Save it for me and we'll connect late this coming week. I'll be out of town till Thurs. Thx...

Consider that tire your's

[Steve1968LS2]

Would the wheels fit a 68 Camaro with a stock front end and a mini tubbed rear end? If they will fit I'll take them if you don't mind shipping to Austin, tx.

They are perfect for a mini-tubbed rear with the right width rear housing.. as for the front, not really for a stock front end, more like one of the Corvette upright based front ends like DSE, Art Morrison, Jakes, 21st Century and others that uses a more "Covette" offset. Of course they could be rehooped for a cost.

Let me know if the wheels and trunk lid deal falls through.

Wheels are SOLD.. trunk lid is pending

[jgpclone]

ill take the trunk lid in local if the deal dont fall through

[MoonMan]

If still available Steve, I'll take the starter. Let me know payment details. Thanks.

[Chevelle LT1]

If Tim passes on the starter, I will take it.