1st gen camaro suspension setup- help please

[s10pro]

68 camaro - Just did Hotchkis front 2" drop coils and 1 1/2" rear leafs. Car has aftermarket front sway bar - need to know what end links to get? Also, when car is at a complete stop, when the wheel is cut going into a turn, it feels like wheel is fighting the other (pushing the other wheel) - could this be an alignment issue? or any thoughts on what this could be?

[Roberts68]

The end links should be of a length to allow a 90* angle from the end link to the sway bar, basically plumb vertical at ride height.

I'll just plug Mark Savitskes "How to Make your Muscle Car Handle" or Tony Hunthimers "How to Build Pro-Touring GM Street Machines" books and let you go from there. The $40 I spent on those two books is the best $ I have spent on suspension so far.

I really posted to hear how it goes for you and how you like the setup. Hope you can post some pics of ride height, give details on wheels/tire sizes etc...

[s10pro]

any one know what end links for my setup

[dhutton]

any one know what end links for my setup

Energy Suspension makes them in all lengths. Figure out the length as explained by Roberts68 and then order them on Summit.