Results 1 to 13 of 13
Thread: E-Fan shroud question
Threaded View
-
09-04-2011 #1
New to Pro-Touring
- Join Date
- Jan 2005
- Location
- Andersonville,TN
- Posts
- 47
E-Fan shroud question
Ok, here is my scenario. I have one of the cheap Summit racing aluminum electric fan shrouds. It is for a 16" electric fan and covers pretty much all of my radiator surface. This thing works great while sitting in traffic. It keeps my 454 cool no problem. The issue arises when on the interstate. It will climb to 210-220F after extended driving, 10+ minuites, then if sitting in traffic it will drop back to 160-170F. I have seen some of the aftermarket fans with shroud that have some flaps that open when there is a high pressure area between the radiator and shroud to help cooling. That seemed like something that I could try. After thinking about it I am not so sure that this will help me so much and here is why I think this. If the total radiator are is 450 sq/in and the 16" diam. fan is 200 sq/in I already have well over half of the rad area blocked. If I was to cut 4 3"x4" holes in the shroud that would only add 48 sq/in of flow area with the flaps completly open. This seem like it would only make a marginal improvement. My main question is this: Are the flaps in the shroud there to increase flow area, or are they simply a pressure relief "valve" that relieves the high pressure area between the radiator and shroud to allow air to flow more freely? I have removed the fan and shroud assembly and installed a junky looking mechanical fan and the temp issue on the interstate has been solved. I just dont want to keep the mech fan on any longer than I have to.
-





Reply With Quote



