Anybody know how to fix anything anymore?

[MuscleRodz]

I bought a wrecked 01 Camaro to fix for my wife about 6 months ago. Took it to a frame shop and all they had to do is pull it staight, bob the rails in front of the towers, drill out about 25 spot welds, and install core support and weld the rails together. After paint, you wouldn't be able to tell it had been fixed, right? Instead, they took an air chisel to break the spotwelds, tried to straighten the acordianed frame rails, and welded the core support in crooked, and then tried to hide their work with black undercoater on my white car! (I did take all the body panels to the frame shop with the car to make sure they got it right). Took it back after I trial fitted everything and found the front end wasn't square and the bumper cover sat 1" below the hood. Picked it up a second time, and looked close enough (didn't realize everything was loose underneath). I already had enough of this shop. Well now the car is painted and was final fitting everything only to find out they never took the core support loose and fix it. The bumper cover is still 1" low and I am PO'd. Sorry for the long post but needed to vent. Here is a pic to show my problem.



Mike