Results 1 to 20 of 44
Hybrid View
-
03-20-2011 #1
Banned
- Join Date
- Aug 2003
- Location
- Orlando, FL
- Posts
- 8,745
I cannot find any 11.5 fans. They are most likely 11s which a pair will pull 2600 or so. Which in many cases is enough but for a water heater big block, prolly not.
Our standard F body set up runs dual 13s and pulls 3490. I am building one now for a 598CI water heater with dual 16s pulling 4800CFM. It requires relocating the battery to the trunk, opening the core opeing in the core support, and some redrilling. I will do a little install feature on it when we do it.
Our set ups are a lot more expensive the what you have, but everything about them is a much higher level of components. Your looking at $900 or so for radiator, fans and built in shroud.
-
03-23-2011 #2
Registered User
- Join Date
- Sep 2007
- Posts
- 162
Update:
The entropy shroud does not allow enough airflow while cruising. I removed the shroud and the temp dropped 45 degrees.
Reply With Quote
