67-68 camaro tilt column

[birdsandbowties]

i have enough parts to build another 67-68 camaro tilt column, this pic is one for a customer on here thats sold, i got another gm column that i use to convert a stock non tilt 67-68 camaro or firebird column, it can be a few different ways as far as paint and tilt /turn levers, i offer stock or billet aluminum, shiny or satin finish, it will come with the coupler like in the pic, it is a bolt in and you dont need any adapters or anything to put it in the car, about a 2 week wait , i want the paint 100% dry before i ship or assemble the column, 400.00 including shipping to the u.s, Jim 850-564-0072

[aany001]

Jim I might be taking that column off ya my buddy still wants one.Will keep you posted my friend.

[birdsandbowties]

cool ! thanks !

[Ron.in.SoCal]

Am I reading this right, you're doing a billet alum colum for $400?

[birdsandbowties]

no, thats the tilt and turn levers, the column is all steel

[tazzz25906112]

Jim check your tel message and respond please.... I may need a third column as well so let me know about the second and get back to me....
P.S. your message center is full BTW....

[AintQik]

Need one for the 67. Get back to me Jim, your PMs are full.

[makoshark]

I'm not trying to purchase a column from you, but I need to reassemble mine and I cannot find the diagram that I had to do so. Any pointers you have or diagram you could possibly share so I can get mine back together?

[birdsandbowties]

the 67-68 columns are tough to assemble, each part has to go in order in the right order, or it has to come all back apart and try again, i only have the diagram in my head , if you want to send all the parts in a box i can assemble it for you for about 150.00 if its all painted, a little extra if it needs paint, i dont know why my email box says its full, i cleaned it out weeks ago :( aintqik - i can build a 67 tilt but it will be a month or so i am just about ready to paint a 70 r/s in a few weeks , once i get it done then i can work out some more tilts, my home # 850-564-0072 if you ever need to call , best is after 8pm, Jim

[CarlC]

Jim,

Is the column still for sale?

[1Bad68camaro]

Once you get caught up I would be interested in one for a 68 Camaro. Thanks, T.

[birdsandbowties]

i have enough to build about 5 for 67-68 at the moment, after i get this camaro painted i will email you guys on this thread who posted, but i have to get this camaro done, the owner is a friend of mine but still impatient, plus i want it gone and done

[CarlC]

I'm in no rush Jim. Thanks for the follow-up.

[AintQik]

Well I am! Just kidding Jim. I can run my straight column until you get caught up.

[ssuth9]

Hello Jim, I would like to find out more information from you on the Tilt Column.

My column has the "Column Shift", the column shift isn't being used as I have a ratchet shifter installed on the floor...
Can this be converted to a tilt?

Thanks
Steve

[1Bad68camaro]

Please pm me when ready for another order for a 68 camaro tilt column. Thanks, T.