Results 1 to 20 of 38
Thread: Broke In Cam Now Popping Sound
Threaded View
-
06-14-2005 #14
Registered User
- Join Date
- Aug 2004
- Posts
- 1,464
Latest Update
Here is where I am at. I loosened all the nuts on the rockers and reset them using the EOIC method. But I left them loose. Very little up and down play in them if any and DID NOT GIVE THEM AN ADDITIONAL 1/4-1/2 TURN. Figured better too loose than too tight. I ran a compression test on each cylinder (cold since engine wont start to warm it up) and here is what I got.
- #1 210 #3 210 #5 200 #7 200
- #2 210 #4 210 #6 210 #8 195
So I am assuming I dont have a problem with the valve hanging up or a bent valve since I would think I wouldnt get any reading with a bent or hanging valve Correct?
Also is there such a thing as having the valves too loose? Could this cause a backfire or a non starting problem? Once again thanks for all of the replys I really appreciate it.
Mark
TOOFUN
-
Reply With Quote
