2nd Chance Camaro - Let the Project Begin

[syborg tt]

Working on the Kicker Center Channel (03-14-20)







It's to bad I won't be using the grills as they look really nice.



Making sure I have enough clearance for the weld studs.





Remember my note pad well I took a pictures of it and printed on 11 x 17 paper so I could tape it to the windshield. This way I
won't need to look for my glasses every time I want to read it. I will also writes notes and changes on this so when the car is
complete I can redo the wire diagram in case I ever need to look back I will be able to have a reference sheet.



Back to Ace Hardware for some mock up bolts as these will all be replace with ARP bolts. (03-15-20)

and of course another Chunky bar.



Time to fit the core support and yes more blue tape as the Covid-19 Lock down makes it difficult to mount the core support safely by myself.





Here goes nothing.