Holley Tuning for E10

[kryptik]

Alright Shaker, wasn't trying to be stubborn. I appreciate the advice and will purchase a 10 micron paper filter, and I will play with the initial timing and see what it does. Would you suggest I change the PVCR's and ONLY increase the primary jet size?



P.S. Is cellulose the filter material I should purchase? Because that is what the Summit filters use. The only one with 10 microns and a paper element (with -8 in/out) is a Russel found here: http://www.summitracing.com/parts/RUS-649000/?rtype=10