First Gen Camaro Full Frame

[ProdigyCustoms]

Morrison is what you're using on Unfair, right?

Does that kit include any suspension parts? Arms/shocks, etc? 10 Grand is a hefty price.

We are using Morrison in Unfair but are using a custom "5 link" that is both a drag race 4 link and road race 3 link all in one. And that system is anything but a bolt in.



The system I was talking about includes complete fornt clip with C6 Corvette arms and spindles connected to a rear clip with triangle 4 link (under the floor) rear suspension and includes housing and axles. So when installed you can put tires on it and roll it.

So $10k is not so hefty when you look at all you are getting

[Vicinity]

We are using Morrison in Unfair but are using a custom "5 link" that is both a drag race 4 link and road race 3 link all in one. And that system is anything but a bolt in.

The system I was talking about includes complete fornt clip with C6 Corvette arms and spindles connected to a rear clip with triangle 4 link (under the floor) rear suspension and includes housing and axles. So when installed you can put tires on it and roll it.

So $10k is not so hefty when you look at all you are getting

Oh no, Frank, don't get me wrong. I'm not saying $10k is too much to ask for it, I was just saying 10k isn't carry money... (for us normal people ;) ).

[GrnDragon]

I wanted the same thing, and ended up buying a custom full frame from JRS with a 2x3 profile (since I am running a full 12+ upper cage). The cost is kind of staggering too. What you see in the picture below is about $30k (wheels/tire/brakes take about $13k). I have been piecing it together for about 2-3 years.


I mainly did it because I planned to buy a VERY rough shell that would need a new floor and other metal and with the money I saved buying a rough shell I could use that on the full frame and new FLAT floor pans.