'67 GTO LS3 Swap

[CFster]

I like them too! Thanks.



We've been going back and forth on the ride height. I though that in the first few pics it was too low, then Marcus sent me some scans of some old Pontiac ads - these cars really sat pretty low from the factory. I think it will be a compromise somewhere in the middle - the first shot of the car has only 3-1/4" from the front crossmember to the ground. And the AutoKraft pan sits a hair lower than the crossmember on the rear edge, so I don't want to take any chances.

Can't wait to get it lined up and drive it.

FYI, also have a Shrifter coming...