coil over settings

[MrQuick]

I have a 69 camaro with QA1 bolt in coil over shocks on the front of the car. After looking at both sides , the pass side collar is about 1 to 1.25 inches higher as compared to the driver's side. Yet the car sits level side to side. However, under hard braking the car will pull to the right and driving at high speed it will pull to the right.

All the suspension components are in good shape as are the brakes. Before I start pulling stuff apart, should the collars end up being set about equal side to side once the ride height is set? Something doesn't seem right with this one side of the car.

normal unless your car is the same weight left front and right front.

the pull can be a brake or toe issue.