Results 1 to 3 of 3
-
05-23-2005 #1
Registered User
- Join Date
- May 2003
- Location
- Austin, TX
- Posts
- 621
Subframe connectors, which bushings?
Right now I have poly subframe bushings, I am installing a set of ds&e SFC and I was wondering if I should stick with the poly or go to aluminum.
-
05-23-2005 #2
Registered User
- Join Date
- Oct 2003
- Location
- Arvada, Co
- Posts
- 2,119
I would go with aluminum. That is what my gut tells me at least. You just do not want any flex between the body and subframe with the DSE weld in connectors. I know the poly should not flex, but alum. will not flex. They also will not make noise like the poly can.
Brian
I have an unlimited budget. That bad part is I have already used it up.
05-23-2005 #3
-Moderator-
- Join Date
- Mar 2002
- Location
- Redwood City, CA
- Posts
- 1,895,413,640
It's always recommended to go with solid bushings when installing subframe connectors.
Allen Ortega
Meanstreets Performance Fabrication
---------------------------------------
Vegetarians are the reason for global warming
Reply With Quote
