Results 1 to 3 of 3
-
09-10-2010 #1
Registered User
- Join Date
- Apr 2006
- Location
- Atlanta GA
- Posts
- 7,477
fellas, where did you get your intake hose for your lS7 ?
dont know where to begin to look for 4 inch hose like this..
anyone know?
thanks!!!
-
09-10-2010 #2
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Orlando, FL
- Posts
- 10,604
I'd bet it's aluminum or stainless tube--welded up, smoothed, and painted.
jpJohn Parsons
UnRivaled Rides -- Modern upgrades for your ride.
UnRivaled Rides recent project -- LS9-powered 69 Camaro
09-10-2010 #3
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
Yup, with a short pice of rubber in between that and the TB.
Originally Posted by parsonsj
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
Reply With Quote
