Results 1 to 4 of 4
Thread: convertible wheelhouse
-
08-05-2010 #1
New to Pro-Touring
- Join Date
- Dec 2004
- Posts
- 58
convertible wheelhouse
i just bought a set of inner and outer wheelhouses for a 67 convertible and they have printed on them excluding convertilble. So my question is why wont they fit because they seem to be the same when matching them up? any ideas? If its light modifying ill do it or am i screwed and need to get diffrent ones? any and all help would be greatly appreciated.!.
-
08-05-2010 #2
Registered User
- Join Date
- Aug 2004
- Location
- New Jersey
- Posts
- 1,315
I'm guessing the tops of the wheelhouses are indented or flattened to allow the top to fold. Mine are flattened at a slight angle toward the top front. Can't recall if the coupes are as well.
Camaro Convertible Build Pics - http://s447.photobucket.com/albums/qq198/rob07002/
www.musclerides.com
Rob Stevens
08-05-2010 #3
Registered User
- Join Date
- Mar 2008
- Location
- Ramona, Ca. San Diego area
- Posts
- 1,307
On mine the seems that are welded together are bent over so the top clears when folded down. That's all I know that is different.
Let us know what you find out.67 Camaro convertible (Jinx)
08-09-2010 #4
New to Pro-Touring
- Join Date
- Dec 2004
- Posts
- 58
i matched them up to the crappy rust infested ones and it seems to be the same except for the pinch being hammered over i guess
Reply With Quote
